IdStory Identity Manager

I think the behavior is ok, but message can be improved to prevent misunderstanding.

• warning limit 2
• disable limit 2

• first check the warning
• then check disable

For this settings is for second provisioning operation checked first warning and then continue with provisioning operation. For third provisioning operation run was finally checked the disable. So the 4 operation was blocked. I updated the behavior with evaluation warning and disable check, now is first checked disable and then warning check.

Only information for this settings: for your case will not be sent the warning message, because is same as disable check.

The issue that describe Alca I try debugging and test with different idm settings (asynchronous provisioning on/off, event process asynchronous on/off), but for local environment it is working correctly.

So for better sleeping and rest in soul I moved whole method with check the counter for provisioning brake into synchronized method.

Commit: https://github.com/bcvsolutions/CzechIdMng/commit/5ef5d5ae23ce0ca2e6d55d646ac41b873374f70d (branch develop)

Information with equals or higher limits was added into documentation:
https://wiki.czechidm.com/devel/documentation/provisioning/dev/break
https://wiki.czechidm.com/tutorial/adm/create_provisioning_break#create_the_provisioning_brake_configuration

Please Milus could you check yout scenarios again? Now it is working better with equals limits. Thank you.

I did test and review, it works as desired above, thx!